The rotary adsorption, concentration and purification equipment adopts three continuous procedures of adsorption concentration desorption incineration, which is mainly aimed at the treatment of waste gas, especially suitable for the environment with large air volume and low concentration. The rotary adsorption concentration and purification process belongs to VOC waste gas treatment equipment, which mainly uses ceramic fiber as the base material, and then makes into a honeycomb large disk wheel system, and the surface of the equipment is coated with hydrophobic zeolite as adsorbent. It is mainly composed of five systems: exhaust gas pretreatment system, runner concentration and adsorption system, desorption system, cooling and drying system and automatic control system.
The wheel adsorption concentration purification equipment can be used in exhaust treatment of various painting workshops, such as automobile manufacturing, shipbuilding, aircraft manufacturing, etc. It is also used in exhaust treatment of various printing workshops, semiconductor integrated circuit manufacturing process, exhaust treatment
Liquid crystal display manufacturing process exhaust treatment and lithium-ion battery manufacturing process exhaust treatment and so on... It can be seen that this equipment is widely used.
The rotary adsorption concentration and purification equipment is a kind of waste gas treatment equipment with energy saving and no secondary pollution. It has the characteristics of high energy, stability, low comprehensive operation cost and so on. It is one of the advanced equipment for treating low concentration waste gas. Its structural features are as follows;
1. The adsorption and desorption rate is high, so the work efficiency is relatively high;
2. The pressure drop caused by the adsorption of VOCs on the runner is relatively low, which can reduce the power consumption and save the electric energy;
3. It can convert the original high air volume and low concentration VOCs waste gas into low air volume and high concentration waste gas;
4. The whole system adopts modular design, which has a relatively small space demand, but also provides a continuous and unmanned control form;
5. The equipment has an automatic control system, which can not only start with one key and operate simply, but also monitor important operation data with man-machine interface.
Source: Jiangmen environmental protection equipment http://www.toquesparamulheres.com
How to maintain environmental protection equipment in Jiangmen
1. The user shall carry out the concrete foundation construction according to the basic data provided by our company; the equipment should be installed on the concrete foundation more than 100 mm above the ground; 2. The supporting pipes and valves shall be separately supported and shall not be fixed on the tower equipment; 3. Attention shall be paid to the protection of the equipment during installation, so as not to damage the machine body and exposed parts. When the tower flange is connected
Ten maintenance details of spray tower of Jiangmen Guoqi environmental protection waste gas treatment equipment
Exhaust tower, in the type of exhaust tower, is one of the exhaust towers with long service life. It can deal with almost all mixed gases, so far it is a very practical and cheap product in the treatment of mixed waste gas. It is widely used in chemical industry, light industry, printing and dyeing, medicine, pharmacy, steel, machinery manufacturing, electronics, electroplating, painting, paint and other industries. It mainly deals with tail gas such as sulfuric acid, nitric acid and hydrofurani
Common points for attention in installation of waste gas and wastewater treatment equipment in Jiangmen
1. The user shall carry out the concrete foundation construction, and the installation surface of the foundation shall be on the same horizontal plane, and the allowable error shall not be greater than 5mm. The exhaust pipe of purification tower can be fixed by derrick type, and the foot is fixed with embedded steel plate by welding or embedded bolt. Therefore, the purification tower can not be fixed in general. The matching FRP fan is generally designed as steel frame vibration damping pedestal
Analysis of waste gas treatment equipment including those five factors
Waste gas treatment equipment is also known as waste gas purification equipment. Waste gas treatment refers to the pretreatment of the waste gas produced by industrial sites and factory workshops before discharge, so as to meet the national standards for external emission of waste gas. Today we Jiangmen environmental protection equipment home for you to introduce the analysis of waste gas treatment equipment including which five factors. General waste gas treatment includes organic waste gas tre